Search results

Hi everyone sorry I have not given an update , my father inlaw passed away and I had to put things on hold , I should be finnishing up the barrel this weekend and testing it out .

your barrel may be dirty and have a lead build up in it , give it a good cleaning and see if that helps and shoot a few pellets through it to give it time to brake in

mine would be daystate , I have a delta wolf and I love the gun but QC was bad , I got it new and cleaned the barrel and found 3 gouges pitted on the od in spots that were very deep and rusted , the first fill on the tank it leaked bad , this gun was QC checked and tested befor I got it and I...

Hi everyone , I was going to wait till the first barrel was done and tested but I could not wait to tell everyone , so this is what I am doing , I bought a lathe and had custom tooling made up it took a lot of work getting everything and making shure it was the correct size and the rite tooling...

my 22 delta wolf shoots 28g seneca hunters real good at 915 fps here is 3 groups of 3 at 22y

here is the seneca 28g hunter at 915 fps these are 3 shot groups at 22 yards same hole 3 times they are tight in the barrel but shoot real good one hole , I did the same with a 10 shot group but dont have a pic of it never got a flyer but the do drop alot from 22 to 35 y they drop about 2 inch

I have a tune for 2 pellets the first one is for seneca and last photo is for H&N hornets

my condor had the same problem about ten years ago I got tired of taking it apart and fixing it over and over so I took out the safety latch part and run it with out a safety and the trigger works much better I only cock it when I am ready to shoot it and decock it if I dont take a shot

I run my reg at 152 and my volt at 65/68 and dwell at around 2200/2800 shooting 25/28 gn , it sends them around 900/950 I think the reg at 150 works good , I up/lower the volts when I get the speed I am looking for I back the dwell off untill it starts to drop speed then I give it more volts...

I have a dw hp in 22 and I have shot the cp’s with no problem , I was able to lower the power to shoot them , just lower the reg to about 100/120 bar and voltage/dwell to about 50/1800 you will have to play around with the settings to fine tune it but it can be done and you will get alot of...

Hi everyone , after reading all the posts and thinking about it alot I would have to say .22 is going to offer a better range of power and distance , you can shoot it at 10 foot pounds or 80+ , I have shot alot of small game at 100y to 115y with no problem and getting dime size groups that...

you would think a small fan like that would have not been able to suck something in but it does and spins fast, it pulls alot of air in and out and does its job real good at keeping the compressor cool but it is loud

I got a new ultra valve and barrel clamp for my DW so I went to my work bench and installed it , I started to fill it with air and charge the battery and while I was waiting I thought it would fill the mag with some pellets so I got the tin and set it down next to my gun and air compressor I...

I am near lebanon in schaefferstown , it takes me about 40 min to get there

I am a member there , I was going to post an ad there also to see if anyone is interested in shooting I just have not been able to get down there last few months now I have some free time to go down there

Hi everyone , if there are any members near lebanon/hershey/lancaster that would like to meet and go shooting I would be happy to shoot with you and let anyone try my delta wolf that wants to or any ammo I have to see how it shoots in your guns , I also have a corbin press and can make .217...

I had the same problem with PA with all the emails and bs ads on there web site I dont order from them anymore and airgun depot seems to have the same pop ups on there site and it looks like PA wwb site , not shure if they are the same company but looking at there web sites I think they are

I have the s press , I did slug the DW barrel and a .217 should work but it does not , I have shot every size from .216/2165 .217/2175 .218/219 and no luck , used nsa jsb and h&n slugs patriot and fx daystate howler none shoot good at any speed

I got my corbin press in 2008 to make slugs for my af condor at the time there were no airgun dies so I had custom dies orderd the were keith semi wad cutters with hollow points and flat and dish base I tried every size from 216 to 219 and none would shoot so I spent about 3 tho and could not...

I got my condor .22 back in 2015 , I put a heavy hammer weight and a high flow top hat and it was great for a while lots of power but I could only get about 8 to 10 shots it would use 100 psi every shot after 5 years of hand pumping after every few shots I gave up and put it away then last year...