Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Marauder G3, The Things I Do For Fun

I have been trying to find info from anybody shooting slugs in their .25 G3 and it is scarce. So... I have just been looking at the options and today I ordered some of the .250 38gr Heavy Slugs from H&N. These are the lightest in their new heavy line, which I want to try because it uses a new softer lead. I will try to get them to 950fps and see what happens. I don't believe that I could get much heavier slugs to do 950fps, so I am topping out at 38gr for now. I know some slugs shoot more accurate going slower and I hope that's not these. I like the speed. The other nice thing about H&N is the price, $8.99 for 120 at HatsanUSA, and their shipping is always $10. If I would have been patient enough to wait for free shipping that's only 7.5cents a slug, not bad.

I'm going to pull the hammerspring off of the SSG and look for a little bit stiffer one too. It's worth a shot, but most likely I'll end up at Mcmaster&Carr I think. Between that and 2500psi on the reg, it's about time to see what this thing can actually do at the upper end.
 
Well I believed that I screwed up turning my regulator up. I must have been complacent and I looked at the guage where I was turning up the regulator, and that guage is for tank pressure, the regulator guage is back on the block. I had thought that I was turning quite a bit for nothing happening and then I heard the blow out. Dumb, I know. I won't be mixing up those guages any time soon again. @BenjeneerJohn helped me out with a schematic and an explanation, along with the correct size oring information [130-032 (-006) ] to use. That was an immense help. It's really nice to not have to guess the size. I think that I finally understand how it works now anyway, it's the most different regulator setup I've seen. Really easy to work on too, nice! I got it all back together really quickly but still haven't gotten a stiffer hammer spring so I will look for that tomorrow. My H&N Heavy slugs haven't come in yet so I haven't been missing out on trying it, but they should be here any day now so hopefully I will be shooting again by the weekend.

Here's some pics of the regulator:

blow out
bmg3r.webp

bmg3rpop.webp

Top down view

bmg3rtd.webp

and a schematic view

bmg3rs.webp

This gun is very nice to work on. There is no glue and everything is beefy.
 
Well I believed that I screwed up turning my regulator up. I must have been complacent and I looked at the guage where I was turning up the regulator, and that guage is for tank pressure, the regulator guage is back on the block. I had thought that I was turning quite a bit for nothing happening and then I heard the blow out. Dumb, I know. I won't be mixing up those guages any time soon again. @BenjeneerJohn helped me out with a schematic and an explanation, along with the correct size oring information [130-032 (-006) ] to use. That was an immense help. It's really nice to not have to guess the size. I think that I finally understand how it works now anyway, it's the most different regulator setup I've seen. Really easy to work on too, nice! I got it all back together really quickly but still haven't gotten a stiffer hammer spring so I will look for that tomorrow. My H&N Heavy slugs haven't come in yet so I haven't been missing out on trying it, but they should be here any day now so hopefully I will be shooting again by the weekend.

Here's some pics of the regulator:

blow out
View attachment 24380

View attachment 24381

Top down view

View attachment 24382

and a schematic view

View attachment 24383

This gun is very nice to work on. There is no glue and everything is beefy.
Is this on the Benjamin MKI 3?
 
Is this on the Benjamin MKI 3?
This whole thread is a running commentary on what I am doing on my Benjamin Marauder Generation 3 in .25 caliber. I mostly avoid talking about any details on other guns to not confuse myself, or anyone else, jumping into the thread. The documentation helps me remember the gun when I eventually have to work on it down the road. These are the only notes that I don't misplace. lol
 
Well I believed that I screwed up turning my regulator up. I must have been complacent and I looked at the guage where I was turning up the regulator, and that guage is for tank pressure, the regulator guage is back on the block. I had thought that I was turning quite a bit for nothing happening and then I heard the blow out. Dumb, I know. I won't be mixing up those guages any time soon again. @BenjeneerJohn helped me out with a schematic and an explanation, along with the correct size oring information [130-032 (-006) ] to use. That was an immense help. It's really nice to not have to guess the size. I think that I finally understand how it works now anyway, it's the most different regulator setup I've seen. Really easy to work on too, nice! I got it all back together really quickly but still haven't gotten a stiffer hammer spring so I will look for that tomorrow. My H&N Heavy slugs haven't come in yet so I haven't been missing out on trying it, but they should be here any day now so hopefully I will be shooting again by the weekend.

Here's some pics of the regulator:

blow out
View attachment 24380

View attachment 24381

Top down view

View attachment 24382

and a schematic view

View attachment 24383

This gun is very nice to work on. There is no glue and everything is beefy.
I have that drawing too LOL. I just need to remove the barrel, so that I can finish disassembling the rest of it. Thanks for posting the photos. I’m pretty technical, but I still can’t get my head around controlling air pressure with washers LOL.
 
This whole thread is a running commentary on what I am doing on my Benjamin Marauder Generation 3 in .25 caliber. I mostly avoid talking about any details on other guns to not confuse myself, or anyone else, jumping into the thread. The documentation helps me remember the gun when I eventually have to work on it down the road. These are the only notes that I don't misplace. lol
Threads like this are a great reference tool. I know I keep coming back to it.
 
A spring day in November! Hammer springs. Today I broke out my spring collection looking for that perfect ensemble of power and grace. The pursuit wasn't close to glamorous but I did manage to find something that might be a good fit. lol

To measure the spring tension I simply put the springs in the SSG and pushed down on a very good electronic bathroom scale until just before bottoming out. Surprisingly consistent results, within a tenth of a pound, good enough for this job. Instead of explaining everything I'll post a picture of the candidates:

springs.webp

Long story short, the 20lb heavy single produced results. I got 38gr H&N Heavy slugs to 945fps where as with the factory spring I could only get to 100fps less, and this was using 2700psi.

Unforunately my regulator still isn't working right so no shooting results any time soon. One thing at a time is still something.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top