250Z Barra 250z with Lother walther barrel slugs that work well

[Northeastbeast]

If you have a barra airguns 250z with there 22 caliber factory Lother walther barrel here are some slugs to try that are absolutely dead nuts accurate.

1. NIelsen specialty aka Nsa 31.2gr .218 diamiter (like cheating accurate)

2. Zanprojectiles 35gr ELR hollowpoint hunting out to 150 yards with out issue if you do your part

3. H&N 34gr hollow point .218 diamiter 50 yard groups were one ragged hole if you do your part.

Hooe this helps. Your welcome

 

[Murfdurf82]

Very nice, did you have to modify much, those are some heavy projectiles.

 

[Northeastbeast]

Very nice, did you have to modify much, those are some heavy projectiles.

See my other posts on the barra and or go to 802_airhead on youtube for a break down. Rifle is heavily modified

 

[Freddy J]

As someone suggested, I tried the 33 & 34 gr H&N Slugs. Had to run my regulator up around 2900 +PSI, to get any speeds over 900fps. have to tether the tank to get any amount of shots. I do have the C-88 Plenum, trigger kit, slug hammer kit and have opened the ports.

 

[Murfdurf82]

That's what I noticed about my .25 max 1 I can shoot heavier slugs but man do I have to crank the regulator. With that rifle I do not know the port size, waiting until the warranty expires.