Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

250Z Are these dings on the entering bevel of the barrel anything to be concerned with?

GAJoe

HAM Shooter
46
144
HAM Points
309.75
Country flag
Last edited:
As mentioned before I'm a newb to air rifles. Just got my New Ver 2 of the 250z and went to polish the barrel "first thing" per Doc Halliday. I got the barrel out and noticed some dings on the entering bevel. How about taking a look and let me know if this can negatively affect accuracy. I'm not familiar with this gun to know if the pellet even touches at this point or if the probe suspends it until the head and skirt gets to the rifling. Does it make a difference that I plan to shoot mostly slugs. Does this pass QC?
20260713_173826-DeNoiseAI-standard.webp 20260713_175429-DeNoiseAI-standard.webp

20260713_175439-DeNoiseAI-standard.webp

Should I just proceed with the barrel polishing and see how it shoots/tunes when everything arrives and gets installed?
If it doesn't do well at that then contact Barra? I got it from them bundled with the scope.
Thanks for your time and help,
Joe
 
Last edited:
Scroll down to page 2, there is a picture of what the breech of my barrel looked like, and what I did to fix it:


To me, it looks like they didn't even dress the end of the barrel at all. I'd file the whole thing flat first and then do what I did before. I really like using the cratex rubber bits, you just have to shape them first running them in a drill and using a file, and you only use them for a few seconds, depending on grit they are incredibly aggressive. I had trouble seating slugs with the factory job, but not after doing what I did. Smooth as butter.
 
I put a 250z in my cart today about 3pm. I been wanting one of these things since they came out. Seeing all the barrel issues that has gone on though, I held off. I figured by now, surely, none of these issues would be ongoing. But then something just said, wait. So I removed it. Feels like I just dodged a bullet.
Barra really does need to jump on a plane and go to that factory and talk to someone that can fix this. I know I read somewhere that Diana has a quality control guy over there, where their SPA guns are manufactured, and you don't hear about these kinds of problems with their airguns.
 
Scroll down to page 2, there is a picture of what the breech of my barrel looked like, and what I did to fix it:


To me, it looks like they didn't even dress the end of the barrel at all. I'd file the whole thing flat first and then do what I did before. I really like using the cratex rubber bits, you just have to shape them first running them in a drill and using a file, and you only use them for a few seconds, depending on grit they are incredibly aggressive. I had trouble seating slugs with the factory job, but not after doing what I did. Smooth as butter.
Thanks for the reply! Does it make a difference that I plan to shoot mostly slugs. So my sentence about the probe suspending the pellet isn't very relevent.
 
Thanks for the reply! Does it make a difference that I plan to shoot mostly slugs. So my sentence about the probe suspending the pellet isn't very relevent.
You really want a bit of a lead, and SPA doesn't seem too concerned about it. If you watch some of the early 250z videos from shootinggearreviews (SGR) on YouTube, you'll see him struggling (but never mentioning) with loading slugs while shooting. It's been a problem from day one.
 
Last edited:
Hold a pellet up to the end and see if the pellet hits that area at all. Me i would polish that up too. You can get rubber tapered sanding bits on amazon for a drill thats what i would use
@JWAG I plan on shooting mostly slugs and have learned that it may very well cause an accuracy issue. I sent Barra's help line the details, waiting for a reply. I shouldn't have to pay $50 to $60 for the cratex rubber bit set on Amazon and put the time in to repair it, and possibly do more harm. Not having done what your talking about before to get the correct angle or curve I'd prefer they send a new barrel, that is correct, to replace this one. I've gotten too many comments stating that this is unacceptable. I'm hoping that I can report back that Barra made it right to restore our confidence.
 
Sorry, I didn't actually answer your question, but yes! I really like to work on my own guns, but, that is a perfect example of when to say when. It is the worst example I've seen. That still doesn't mean that you couldn't fix it and it get it to shoot well, but why gamble. And where is QC for these? They're going to have a hard time selling the new models if people see examples that they are still not getting their act together.
 
This was a barrel I purchased last September. It was packed horribly and the damage may have come from shipping.

3320.webp

Now the ones I got in late December or January were much better looking. They took this one back and refunded me.

But for the life of me I can't how something like this is shipping in new guns at this time. Unless they're rolling the dice and hoping that most of the guns won't be sold to people that pay attention and visit these forums.
 
This was a barrel I purchased last September. It was packed horribly and the damage may have come from shipping.

View attachment 22128

Now the ones I got in late December or January were much better looking. They took this one back and refunded me.

But for the life of me I can't how something like this is shipping in new guns at this time. Unless they're rolling the dice and hoping that most of the guns won't be sold to people that pay attention and visit these forums.
That looks like there is a piece of tape added inside the ID of the breech opening. Did you try to remove it? Maybe it was put there as part of their manufacturing process (crude as it might be) for protection and then wasn't removed???
 
That looks like there is a piece of tape added inside the ID of the breech opening. Did you try to remove it? Maybe it was put there as part of their manufacturing process (crude as it might be) for protection and then wasn't removed???
I think that appearance is just from the phone camera. It is metal, with irregular machining marks. The new ones I got looked the same, just without the dings and bends. I smoothed them out before I polished.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top