Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

250Z Barra 250z

Northeastbeast

Northeastbeast

HAM Sniper
492
1,700
Usa
HAM Points
2,891.25
Country flag
Available goodies for the Barra 250z
Trigger kits
Slug power kits

Coming soon

Full oring rebuild kits
Regulator rebuild kits
Drop in Lother walther choked and unchoked barrels
Drop in tactical bolts

Full tunes for both the barra 250z & Umarex Notos. For tuning information email at Biz802_Airhead@yahoo.com

www.ebay.com

rogueair on eBay

Follow rogueair on eBay. Buying, Selling, Collecting on eBay has never been more exciting!
www.ebay.com
 
I have three different slugs coming, to try out. I have already tried six. If I don't get happy soon, I figure it might be cheaper to buy a new barrel than more batches of slugs. A drop-in LW sounds tempting regardless. Either way, I am really happy about the aftermarket already stating to pick up for this gun.
 
Pumacarl said:
I have three different slugs coming, to try out. I have already tried six. If I don't get happy soon, I figure it might be cheaper to buy a new barrel than more batches of slugs. A drop-in LW sounds tempting regardless. Either way, I am really happy about the aftermarket already stating to pick up for this gun.
Click to expand...
If you mite be interested in a full tune reach out, i have got this rifle figured out. 😁
 
Pumacarl said:
Thanks, but that's my thing also. I have a real lot of time in on mine already too. Check out the Barra thread "250z Workin on it" I put an arca swiss rail on mine that I am very happy with, among other things. My winter project.
Click to expand...
Its not a bad gun, needs some refinements but over all not bad. Im not a fan of the stock i wish it had wood. Ive been pricing some aftermarket stocks in hopes to get one done up.
 
The stock, as I have made it, is pretty damn good, but the killer for me is that the threading on the tube can't take my AR folding stock adapter. I'm still mildly furious about this and don't see a good way around it. Why would Barra accept a non-compliant specification in a U.S. market that is flooded with this stuff? I just don't get that.
 
Pumacarl said:
The stock, as I have made it, is pretty damn good, but the killer for me is that the threading on the tube can't take my AR folding stock adapter. I'm still mildly furious about this and don't see a good way around it. Why would Barra accept a non-compliant specification in a U.S. market that is flooded with this stuff? I just don't get that.
Click to expand...
Thats a good point. The fact they didnt use a mill spec buffer is beyond me. But i wonder if a threaded adapter could be made?
 
Me too! I have been confused myself about the incompatible (with Mil Spec) AR buffer tubes that are found on a number of air rifles - not only this one.

I THINK the reason is that there's a small difference in tube diameters and/or threads between Mil Spec parts and AIRSOFT parts. The buffer tubes we are seeing on some airguns are airsoft-spec, I believe.

Somehow I seem to remember someone telling me this. However I can't remember who, or when. So it may not be correct. I'd welcome input from someone more knowledgeable than me on this topic :)
 
hameditor said:
Me too! I have been confused myself about the incompatible (with Mil Spec) AR buffer tubes that are found on a number of air rifles - not only this one.

I THINK the reason is that there's a small difference in tube diameters and/or threads between Mil Spec parts and AIRSOFT parts. The buffer tubes we are seeing on some airguns are airsoft-spec, I believe.

Somehow I seem to remember someone telling me this. However I can't remember who, or when. So it may not be correct. I'd welcome input from someone more knowledgeable than me on this topic :)
Click to expand...

If the diameter of the port on the rifle is smaller , the adapter might have to be made out of a bar stock, step down into the rifle, and up for the stock... either way... im sure it is feasible just needs a little time and investigation.
 
Welcome back Kevin! Have at it! It would be awesome to have a solution to all these guns not being to standard. The Macavity has a problem with this too. These guys are literally shooting themselves in the foot by not having these guns be more parts friendly. I just don't get it.
 
Pumacarl said:
Welcome back Kevin! Have at it! It would be awesome to have a solution to all these guns not being to standard. The Macavity has a problem with this too. These guys are literally shooting themselves in the foot by not having these guns be more parts friendly. I just don't get it.
Click to expand...

We can consider me back when im finally shooting again, although I did extend my range at home to 125 this past weekend ;) a little side quest I decided to take on.

Either way, it is baffling because with so many standardized product out there you think theyd want to capitalize on it, guess not. Who knows why? Either way, I have been writing down this , that, and the other thing as far as how and what I wanted to do to get back into airgunning and the Barra was on the list.
 
Northeastbeast said:
Available goodies for the Barra 250z
Trigger kits
Slug power kits

Coming soon

Full oring rebuild kits
Regulator rebuild kits
Drop in Lother walther choked and unchoked barrels
Drop in tactical bolts

Full tunes for both the barra 250z & Umarex Notos. For tuning information email at Biz802_Airhead@yahoo.com

www.ebay.com

rogueair on eBay

Follow rogueair on eBay. Buying, Selling, Collecting on eBay has never been more exciting!
www.ebay.com
Click to expand...
Hey brother! Are you going to make a better shaped trigger for the Barra 250z rifle? This flat square thing that comes on the rifle sucks. I've got your trigger spring setup coming already this week for an improvement there. Is your slug power kit easy to install? I probably just need to get it ordered too! Lol
 
Dogowski said:
Hey brother! Are you going to make a better shaped trigger for the Barra 250z rifle? This flat square thing that comes on the rifle sucks. I've got your trigger spring setup coming already this week for an improvement there. Is your slug power kit easy to install? I probably just need to get it ordered too! Lol
Click to expand...
Slug power is super easy to install. Take off the stock, unscrew the hammer spring, add the new weight and spring… reassemble. Start with it all the way out and retune… unless you’re going to crazy high psi it won’t need much.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Register

Log in

Already have an account? Log in here.

Similar threads

Northeastbeast
250Z Barra 250z 22 cal oring kits
Replies
3
Views
595
Swfairgunner
S
Northeastbeast
250Z Barra 250z 22 caliber complete overhaul
Replies
5
Views
2K
Pumacarl
Pumacarl
Florida_Man
Others Don't Overlook the .25 Caliber Air Venturi MicroStrike
2
Replies
24
Views
2K
RatSmacker
R

Trending in this forum

Back
Top