Search results

Ive not had the issue with the stock screws. I was able to snug them up good and tight with out issue. The rubber gramet thing works just have to be careful not to misplace it when handling the rifle outside of the stock.

The first in a series of many How to videos on the 270z. This video covers how to swap the bolt to make it left handed. How to remove your trigger group. How to get to and remove your hammer spring. Hope this helps.

Im going to take it apart and see if the air ways are in need of opening like the 250 to let the rifle breath better. The block is about 98% the same as the 250z besides the trigger being moved to the rear of the block and the addition of a few sears. My slug power kit fits the 270z for sure...

DNT & Arken are sister companys yes.

So i have got a 22 & 25 caliber 270z and just from spending 5 minutes looking the first one over i can tell there are some thing in the trigger that need fixing. Or some better uping or smoothing out. What ever you get the point 🤣. So give me some time to get to know the rifle and I shall share...

Steel and aluminum

With the huma reg comes a very high risk of galling and freezing the reg to the other parts.

Very Excited for this rifle. I am 110% doing a Take it apart serious for youtube 🎯👌❤️

I just picked up this Bam XS-B26-2 22 caliber in a thumb hole stock. These have become urber rare. Once upon a time these were extremely popular amongst tuners. They are a clone of the famous Beeman R9/Hw95. The triggers on the Xs b262 are also a very good clone of the Rekord triggers found in...

Coming home to new glass is always a treat! The Arken Optics USA EP-5 Gen 2 7-35x56 delivers exactly what you'd expect from Arken right out of the box. The turrets are crisp, the clicks pinpoint, and the glass is incredibly clear. It's built with premium Japanese ED glass and robust internal...

Well, this year's Pyramid Air Cup has come and gone. I had an amazing time, saw some folks I look forward to seeing each year, and met some new folks who I talk to here on this forum as well. Benchrest card one, not my day. I shot a 210, and that was just not going to cut it. I made some poor...

The kit does not tell you what orings are included or what rings go where. I dont believe its even a complete oring rebuild kit. Its just a handful of commen problem and or leak point orings. I had pyt together complete full kits but they didnt sell very well so I assumed people did not want...

Wow that thing is amazing. Love i

So far out of mv wheel well, but we going to give it a crack for the love of the game. It has a 1:24 twist barrel, the rifle is not moderator friendly as it will not cycle properly so the muzzlebreak will have to do. The break forsure helps control the muzzle flip. Trigger is good for a...

See my other posts on the barra and or go to 802_airhead on youtube for a break down. Rifle is heavily modified

If you have a barra airguns 250z with there 22 caliber factory Lother walther barrel here are some slugs to try that are absolutely dead nuts accurate. 1. NIelsen specialty aka Nsa 31.2gr .218 diamiter (like cheating accurate) 2. Zanprojectiles 35gr ELR hollowpoint hunting out to 150 yards...

You will have to find a set regulator pressure then work your hammer spring in till you find a speed that gives you the accuracy your after. It takes alot of time ammo and air tuning a rifle that's for sure.

High pressure pneumatics also had 4 left in stock

Ive already got one 😁

There was a fella that had made a 3d printed piece for that but I've not seen them for a while.