Had a problem with the hammer spring adjust screw on the 250Z in .25. There is no way to back the hammer spring off to a lower setting as it jams against the bolt recess on the stock. Contacted Barra about this and no helpful response. Remove the stock and back the hammer spring adjuster ccw...
Very good point about the 1 second max view for the reticle ocular clarity. Most shooters do not realize how much their eyes compensate for a fuzzy view.
You are so right about destructive testing. A 4500 psi SCBA tank pressured up with water to 7500 psi for a TEST?
Stretch that tank out a few times and it is sure to fail. If not, then the 15 year arbitrary "lifetime" clause kicks in.
You know if these tanks are designed to be worn by...
I use a SCBA tank with a HPA paintball tank with adjustable regulator with an accurate 3000 psi pressure gauge in series for benchrest shooting. This turns all my pcp airguns into regulated air pressure for consistent shot accuracy.
I use tape on each airgun to remember best pressure setting...
These compressors pull 1800 Watts which is 15 amps. You need a dedicated circuit with no other load on it except the compressor. You also should have that circuit on a 20 amp circuit breaker and also your outlet should be rated for 20 amps. Most outlets are rated for 15 amps before they...
To reduce fliers: avoid cheap pellets; buy pellets from suppliers that pack them in foam and tightly pack tins in the box;
do not try to perform tight groups if the pellet tin shows damage from being dropped or used as a hockey puck before it got to you. When I have to use a pipe wrench and...
That is right. I fumbled a .25 and it went down that bolt probe hole like a prairie dog. Sure glad I read your article so the pellet could be removed with a needle nose pliers where it jammed the trigger after removing the stock. Now I move the bolt probe slightly forward after cocking on...
Incredible patience and skill to work out these problems with a production airgun. Hopefully this will be a rare example of what to expect out of the box.
I would like to see a precision review of the Barra 250Z by a regular airgun shooter who buys a production model without the free loan or gift of the pre production 250Z. Are there any such reviews out there?
Good overview of bench rest supports for competition shooters. For me when I want to compare airguns without my shooter error getting in the way of results I use a basic gun rest from Sportsmans G which costs about $25. This will work fine for most shooters and is much more stable than bags...
Mike, I only shoot one airgun (one at a time that is). I somehow have acquired 25 airguns waiting in line to be "the one" for next outing anyway. Manufacturers keep improving their line and why resist the new nearly perfect offering?
I got some pellets from Crosman in exchange for a defective airgun. They were labelled Crosman Domed Recreational.
Tin of 250 and 13.7 grain. They were awful and grouped 4-6" at 30 yards. I called them and they sent the real Crosman Premier Ultra Magnum 14.3 grain dome to me which is what we...
I agree that the early reviews by the pros using a prototype airgun are not a sample of the production line. Of course the manufacturers are going to tune this prototype to the max for accuracy and trouble free reviews. The reviewer always says "straight out of the box" it may be so for them...
If you want consistent results with .177 wadcutters at a reasonable price then you need to invest in a quality scale so you can sort them into equal weight groups. It will also benefit if you have a pellet sizer to sort them into equal skirt and pellet head sizes. This takes up a lot of free...