Here's the results on the latest testing with a 5mm ID x 2mm thick o-ring slid onto the power wheel tensioning the spring a tad extra. I will say, ever since swapping to the lower weight .047" hammer spring, my velocities and SD vary more shot to shot. Although the SD seems to get tighter the...
I completely understand that. I mic'ed the bore depth with the spring inside and the length of the power wheel at both MIN and MAX and I believe there was dead space, meaning the spring is free floating until you cock the gun. That's why I went with an o-ring, making sure it was good and snug...
Latest Update on my Ghost HP .22 cal Tune Trials:
I left off the other day trying out the "light" .047 hammer spring with the MRDs and the PW on MAX. Once I got the reg to 108 bar the gun was averaging @ 850fps. I bumped the reg to 110bar and the velocity fell about 10fps. I assumed I didn't...
Of the few sites I've looked at I've seen springs that measure the same in all dimensions but have varying weight ratings. I'd imagine too, you could measure a handful the same size and find variances even if they were supposed to be the same weight. I stopped by Ace this afternoon and picked...
Let me try to measure the weight rating on the .047" and .051" springs. When using the .051 spring the shot cycle was pretty airy but had plenty of power. @ 150 bar and PW on MIN, the 18gr JSBs were singing @ 1100fps I believe. That's why right out the gate I adjusted the reg down to @ 113...
The weight rating is where it's all at, moreso than wire diameter. You can get a .047" spring the same size as the BRK Light spring, but with different strengths in pounds per inch.
Note the screenshot where the 3rd from last column on the right lists weights for .047" springs and the...
I've not shot groups with the MRDs yet, or since swapping to the light .047" spring. So far I've not been able to get the MRDs above 850fps but I've not tried to ease the reg up further after watching the velocity drop yesterday once I went from 108 to 110bar. As for the 18s, that sub MOA...
My understanding is the industry rates spring by lbs per inch. So I'll make a simple tool, much like a t-nut that the spring it sits inside or it slides up into the ID of the spring. Run a cord through it and a washer, capturing the string inside the t-nut and washer. Use a fish scale to to...
That's exactly what I plan on doing and tracking it all in Excel. I just assumed that when turning the reg up yesterday that I hit a wall when the MRDs started losing velocity once I went above 108bar with the PW on MAX. I never went above 110bar after that, I simply rolled the PW down and...
Interesting. For what little testing I've done it does seem I get better results with higher reg pressures, even if that results in higher velocities than is typically considered optimal. No doubt my SDs have gone to pot using lower reg pressures.
No doubt, that light spring that you sent me has indeed allowed auch lower reg for the 18gr JSBs. The shot is very tame too, although I've yet to find a tune that will push the MRDs beyond 840-850fps.
When it's all said, I'll probably run it through the gauntlet from low to high, using both...
Question for you guys who are more tenured and knowledgeable than I.
Generally what's better if both produce the same velocity, higher reg pressure with a lower power wheel setting, or lower reg with a higher power wheel setting?
My assumption would be higher pressure with a lighter tap on...
Today I was able to take a little more time testing the 0.047" Light hammer spring in the Ghost HP .22 cal. I decided that I'd do what I intended on doing yesterday, determine what the max power my gun is capable of with the light spring. I started out with the reg @ 101 bar, the PW set to Max...
I like learning, wrapping my head around mechanical stuff using logic and reasoning to figure them out or understand how and why. I'm so new at this right now that I don't even know where the poppet is or what it does.
Well, what started off as a good plan sorta got squirreled. But hey, that's who I am thanks to A.D.D. LOL
So, here's what went down instead. My reg was set at 105.7 bar to begin with and I loaded up some JSB 18.13 gr pellets and set the power wheel to MAX. The chart below is multiple shot...
Thanks for the clarification. I've not looked at my hammer, but for some reason I was thinking I recall seeing that little paw with the 3 set screws that I believe you said controls the hammer travel distance.