I think I underestimated the stock power levels on this gun.
I wasn’t paying attention last night and accidentally some 60gr Javelin slugs instead of the 52gr. With a couple clicks of the hammer spring they will do 910fps… and while it was only 30 yards they were hitting the same spot every...
Just a highlight reel from yesterday.
Pro tip: For bigger critters the hex slugs over-expand if you shoot them too fast. Unless you’re shooting pest birds I recommend keeping them between 880-920fps.
Final shot is moving up to a 52gr patriot javelin and I liked it much better.
The Hex slug...
Oh that’s really good to know! My main draw was the extra 30bar of top end but it sounds like there’s some serious drawbacks to that.
Also the more I test the gun the more I’m convinced the extra 10cc of plenum between the stock and SHP plenum is significant. I think my gun would probably top...
I think you’re probably right… I also should have said it’s not a complaint. The reg is rock solid so I have no complaints.
Eventually I will put in the Huma reg but I’m not in a rush.
101 FPE
Okay so after playing with the 93-ish FPE settings for the last couple of weeks I decided to push the reg up to 155bar from 140bar.
I found that the 13gram HS weight wasn’t really able to push the 50gr Franco’s above 925-930fps but the shot count was absolute trash. Right around...
It’s so funny because neither machining nor airgunning was on my dance card 10 years ago.
I used to be heavily involved in football(soccer). I’m American but my dad was in the military so I grew up all around the world. Soccer was my passion/hobby/job all at the same time.
Long story short I...
These are now available for purchase for those that are interested. I have mine on the way.
PLANS:
So after much deliberation I’ve decided I’m gonna set aside future .357 plans and I’m gonna go all in on the DRS.
Specifically, I’m gonna build a 150fpe DRS. With the transfer port I’ll have...
Im so glad you got it setup so well! Those groups are really nice.
I completely agree with your assessment too. I find the gun to be an exceptional shooter. It just feels good to shoot.
Okay,
So over the weekend I had the chance to ring steel at 100y and 200y. Both of those targets swing when you hit them so it wasn’t conducive to shooting groups. I’m posting the 100y video first. You can actually see the impacts are consistent and very loud.
This was done off my coyote...
Okay so I didn’t get to shoot much this weekend. Went up the mountain to do some fire prevention stuff on a buddies property.
That being said I did get to ring steel at 100y and 200y and I have to say I was really impressed. It was windy and we didn’t have paint for the steel with us so it was...
Franco Slugs
Yesterday I only had a few minutes so I tested a few 50gr Hollow point from Franco. I absolutely love his .25 cal slugs but he doesn’t do .306 so I couldn’t use him.
I shot a quick mag of the 50gr without touching the tune AT ALL haha… I’m a notorious tinkerer but the gun is...
All things being equal I think your current probably suits the 33s better than the 45s. If it’s the exact same tune then I’m assuming the 33s are going 100-110fps faster than the 45s?
I know the ballistic charts will argue that 850fps is an ideal speed for slugs because it’s the least...
Every gun is different. So it’s really hard to give a full “recipe.” But what Bill says is very accurate in the sense that these threads help you build a mental picture of what the gun “likes” or tends to do.
For example I think the Barra does really well with high reg pressures and very...
Makes me wonder how mine will perform when I move up to the 60-70gr range. Because so far I haven’t even sleeved it.
Was yours struggling with all the slugs you tried or just the heavier ones?
I will say that when I put in the pin probe that I took off the tank/shroud but I didn’t remove the...