Search results

I was messing around with my trigger and got the second stage lighter. Not sure what it's at, but it feels better. I'll have to see if the group size shrinks at all.

Pretty hard to complain abut the accuracy of a new rifle when it shoots like that.

Nice rifle. It should sell quick.

Wolverine Supplies has some in stock. Depending on what you want, they might have it. I was just looking at the MDT GRND-POD and it looks pretty good for the price. Good reviews also.

Congratulations on your new rifle. They really are a well built and well thought out design.

I'm lazy Frank. Hence the question. I realize there are a few roads to get to the same place, but I want the most air efficient one. With my Impact MKII I could get 900fps+ with the 25cal at a reg setting of about 110bar. From the little tuning I have done so far, I think I'm going to need about...

Has anyone seen any recommended reg pressures and FPS for the different calibers and configurations as a starting point for tuning?

...Generally, people don't like being rubbed the wrong way... ...I have no idea what the common denominator is between the two boards....

...there most be something to complain about there... ...or not... ...be happy...

Dowty washer or bonded washer are the terms I've run across.

The new gauges have o rings. The bonded washers are the ones you want. I was worried more about orientation on my tank gauge and didn't have it as tight as it could be and it ripped the rubber when it let go. The o rings don't fit the same and leak. At least the thin one does. I'll try the...

Thanks. If you do the upgrade have some of the new - correct - washers. I reused one and it developed a leak. The o-rings you get from Huma are not the proper ones to use.

My new Wika gauges came in today and I took a picture of the factory gauges and degassed the rifle. I then installed the new gauges and took a picture of the new gauges. I did not touch the reg or anything. I think I will trust the new ones more than the old ones.

Reminds me of a hand wringing old woman.

If anything, warmer temperatures could possibly increase the pressure compared to where it was originally set at. Just spit balling and trying to cover any external angle. I thought I read somewhere that the Delta Wolf had a similar issue. They share the same reg. And that’s not much help to you...

Temperature change?

I chose the red spring based on the spring install instructions. I think 70 ft/lbs is sufficient for the 33.95gr JSB pellets. Here's a good install video.

I had a little time this morning so I degassed the rifle and turned down the reg to about 100 bar. The factory spring on Max gave me 802fps. Black spring 798fps. Red spring 800fps Blue spring 795fps with the sound of excess air coming out the barrel. I then reinstalled the Red spring and started...

.22cal would be fine at 50 yards with a well placed shot.