Search results

can you post a link for the external reg? I would like to take a look at that.

by test the fill do you mean just fill the reservoir and check the gage or assemble the entire gun?

Many replies suggest that my reg should be adjusted, and deep down I believe it needs adjusting. I am kind of tentative about it but am considering the job. I just sold a Cricket on AGN and have the funds for the tools, I was going to use it for beer and cigars. I have been watching excellent...

I like what I am seeing with the 21.53 and 22.07 so probably wont worry with the 18.1, they still group well out to 50 or so

I am doing that today. Rain is in the area so it will not be hard to wait a couple days and see if there is a change

I am posting results of my testing for the last couple weeks. I will mention a few things first and hope my approach is straight forward and will not be confusing. Session 1, chrony shots straight from AOA, no adjustments. JTS 18.1 were over 1000 but surprised by the low ES and the 50 yard...

I will go thru my notes and report back. ES varies with the different pellet weights. I am testing JTS 18.1, 21.53, 22.07, NSA 20.02 in .2165 and JSB 18.1

Will do, thanks. It will be hard waiting a few days to fondle BETH.

I should mention that I have read that the regs come set t0 1950-2000 psi. My reg gauge reads 2200, but how accurate are these gauges? I dont always trust the small gauges.

Been gathering data for a couple weeks, sorting out performance of 5 pellets, group sizes at 50 yards, and lots of chrony print outs to help decide 2 or 3 choices of ammo for Beth. I have found a disturbing problem during all the testing. My very first shot with 18.2 JTS was 965 fps. The next...

Thank you for your input. I had leftover Duct Seal and used that tonight. I used a piece of PVC to roll it out, making 3 pieces that were 2.5 inches wide. I had a stash of 45 cal slugs and placed 4 of those end to end and rolled it up till it was 1 inch OD. Then I placed each one on a piece of...

I checked mine and it is 1.00ID x 7.5 inches long

Appreciate the numbers, that will be a great help! I will check mine and see if they are the same then proceed. I still want to fill with Duct Seal for a dry run

It is the 22 cal Tac with 18 inch barrel

I have been considering adding some weight to my EVOL. Having read many threads on the net It sounds like a good idea and will improve accursary/ groups. Most threads lean to adding to the butt but with the full front rail on the EVOL it would be simple to add and change weights as I field test...

You peal the backing off, aline the decal to surface and rub it down real smooth. Give it a minute and carefully lift the top protective cover, very slick process.

I did some chrony work today with 5 select pellets. Will have a report in the near future

Thats actually a vinyl laser cut decal. Looks great dont it?

Thank you, RIP is 30 cal BETH is 22 cal

No, the weather has been awful, lots of rain and low temps