Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Recent content by passenger

  1. P

    Marauder Benjamin Gen3 - It Just Works and Works Well

    Yes. That is a reasonable use.
  2. P

    Marauder Benjamin Gen3 - It Just Works and Works Well

    But what is the goal? The Marauder Gen3 will never compete with a match 22 rimfire, let alone a 222 Remington or 22 Hornet at distance. But at 50 yards or less the Gen3 wins hands down for shootability.
  3. P

    Marauder Benjamin Gen3 - It Just Works and Works Well

    Is the gen 3 advertise as a slug gun? It does so many things well but I don't think slugs are in it's balliwak. Air guns are so fun at what they do so well but slugs are made for powder guns, Two different worlds.
  4. P

    Marauder Bottle replacement for Gen 3 ???

    I put mine from Airgun Revisions on yesterday. They look great and high quality. Degassing and refilling is a pain but possible with my 3L tank and the yellow breech plug. Don't think just a compressor will work without turning the barrel away from the transfer port. The new bottle is 9 ounces...
  5. P

    Marauder Bottle replacement for Gen 3 ???

    Did you need anything else like seals or special tools to swap bottles? (I just order two for my Gen3 .22 and .25.)
  6. P

    Marauder Benjamin Gen3 - It Just Works and Works Well

    The Benjamin Marauder Gen 3 .22 that I got yesterday is my first air gun that can actually shoot the cheap Crosman HP 14.3s from Walmart well. 56 strait shots directly out of the tin, I did have to discard one mutant pellet as I loaded the mags. SD=3.6 for the string.
  7. P

    Marauder Benjamin Gen3 - It Just Works and Works Well

    Thanks all info is good info.
  8. P

    Marauder Benjamin Gen3 - It Just Works and Works Well

    Just got my gen 3 .22 today and it is shooting 21 grain pellets at 780 fps. The regulator appears to be set a 1100 PSI. I hope to shoot them at 900 fps. I have had a gen 3 .25 for a month and I shoot 29 grain pellets at 900 fps and the regulator was set to 1400 PSI. Very happy with that. I am...
  9. P

    Air Venturi Ascent Multi-Pump PCP Review .22 Caliber

    I just got my .22 delivered from Walmart yesterday. I am shooting 21-23gr pellets and it take ~10 pumps to get back to 3000 after each shot. SD stay great at about 2.0. It is interesting that the Ascent from Walmart has a green area on the gauge up to 300 BAR. The .25 Ascent I bought from...
  10. P

    Crosman Prospect Deal At Pyramyd AIR – Save $150!

    With the power wheel set to max I tune the hammer spring down to get a reasonable 870 FPS for 10.5 grain pellets. Then I turn the power wheel down to get about the same velocity for 8.2 grain pellets and mark a spot on the gun adjacent to the set screw on the power wheel. The gun is delivered...
  11. P

    Air Venturi Ascent Specs And Technology Deep Dive

    The numbers for above are for an 8 shot mag. The SD should stay good as long as I continue to pump back to 3000 after each shot. But the 80 pumps required for each mag is a little tiring. 😥
  12. P

    Air Venturi Ascent Specs And Technology Deep Dive

    What shoots well for you? The JTS Dead Center .25 29.32gr are the best for me so far though most pellets shoot well. I start at 3000 PSI and do 10 pumps after each shot.
  13. P

    Air Venturi Ascent Specs And Technology Deep Dive

    I purchased the .25 Ascent and really like it, neat tech. I also purchased the .22 barrel kit. I have to use heavy .22 pellets to keep them subsonic. 21gr(s) average 960fps. I see the .177 Ascent is now available and I am considering buying but don't know if it is possible to keep any weight...
Back
Top