Recent content by Dago6504

I have the GX-CS4 for a couple years have over 50 hours on the vibration hour meter I installed only issue was o ring for the burst disc fitting leaked. Ordered a new one from GX for like 20 bucks problem solved. I purchased the VEVOR 350 watt water cooled model when it was on sale like...

Received my regulator test/adjust tool for my AGT VULCAN3 .30 from Talon Tunes.

Thank you for your replys. @pfddi so your saying unscrew AGT bottle and a 700mm M18 X 1.25 bottle will screw directly to AGT fitting ?

I have a 2025 purchased in 11/25 V3 .30 700MM. What barrel is in my rifle and how can you tell? Thank you

@PapaT - Thank you. I like it so far just want to make sure I get the most I can out of it.

Picked up a Vulcan3 700 mm in .30 used. Rifle was purchased new in 11/2025 and looks new. I had a chance to shoot it today and the AVS .3063 flat base slugs in 61 gr were averaging 961 fps at about 124 fpe. They were a little tight to chamber in breech. Does that sound correct ? Also does...

Received 2 QD FOX mags for my .30 Vulcan3. Both fit in the rifle tight . Have not loaded them to shoot but will try this weekend. Hopefully they loosen up or may need light sanding.

Now just finished the AEA .58 ZEUS conversion from 32 inch barrel with wood stock to a 24 inch barrel with tactical stock. Changed airtube from 660cc to 500cc.

Using this time during cold weather to catch up on my tinkering tasks. This is my .357 AEA TERMINATOR added 420 cc rear and 700 cc front carbon bottles. Chased a leak for 2 days but today seems to be holding pressure.

Received new to me AGT VULCAN3 .30 700MM. Aired it up and mounted scope but weather is cold and calling for major snow. Hopefully next weekend can get it out to try it out.

Did you get the did you get the Aspen apart to get the probe out of it ? I took an avenger breech apart to get the probe and it had to be completely disassembled to get it out.

It fits for the rear buttstock/breech area but need to come up with something for the forearm. I cut mine to make it work. Not perfect but works. Think if I can get it shooting right I will swap one on my wooden stock Libertys around.

I have been toying with the .22 Liberty and used an Avenger barrel and probe to convert to .25. Changed stock to an AE SWEDE Avenger AR style. Only getting 900 FPS and 40 FPE out of it with 20 gr pellets the way it was set stock .22. Going to take her apart and port it to try to get to a...

Aired up my new Terminator .357. No leaks overnight.

@Dogowski- Thank you much better feel than the printed one I had on it. Has many slots to add accessories also.