Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Slugs and choked barrels

Franklink

Well-known member
514
1,546
HAM Points
2,302.25
Country flag
Some ponderings after cleaning a choked barrel that I shoot A LOT of slugs through...

All the patches in the bottom right of the photo. Took four to get to clean. (.177 patch wadded around a qtip is just the right level of tightness for this .20 barrel). Gunzilla works great to clean the barrel. Inspected the choke area of the barrel and no lead buildup.

1736394992660.png



This is the gun/barrel/slug I referenced here....



I shot 11x5 shot groups at 100 yards yesterday and the average 5 shot group size of those 11 groups was 1.295." This gun typically does slightly better than that so figured I had a dirty barrel as it's been over 900 slugs since I last cleaned it (3 boxes) and a bunch of pellets too. But nope, barrel pretty dang clean, the 1.3" average 5 shot group size likely has more to do with it being the first time I've shot at paper from a benched position in months. Just out of practice.

Anyway, general knowledge is that choked barrels and slugs don't play well together. Usually we see folks stating that the lead will build up at the choke. Might be true for higher fpe/bigger calibers/etc. but it sure doesn't apply here. This choked barrel is VERY good with slugs.

Might be worth shooting some slugs through your choked barrel to see how it does.

(.20 LW 12 land and groove, 1:17.8 with the .20/18.9grain NSA averaging 905fps).
 
I'm new here, so hi everyone.
Specifically looking for choked vs unchoked.
I had a 1377 converted to .20, and its really great. There was debate discussing the build and I went with unchoked. After doing the research, and coming up with Sheridan Blue Streaks are unchoked, and I want to shoot the old school cylindrical.20 cal pellets. And all the cool .20 modern ammo too. I like it so much I am considering a second 1377 or converting a Crosman 362 to .20.
Would going with a choked barrel and shooting those old cylinders be a bad idea? They are slug-like but don't I plan on using actual slug ammo. It seems to me, those pellets may not like getting squished with a choked barrel.
Loaded a photo, I use the factory 1399 stock with it. The original idea was all wood, cant find any place to get a wood shoulder stock.
Thoughts appreciated!
 

Attachments

  • IMG_20250120_103102976.webp
    IMG_20250120_103102976.webp
    345.7 KB · Views: 2
I'm new here, so hi everyone.
Specifically looking for choked vs unchoked.
I had a 1377 converted to .20, and its really great. There was debate discussing the build and I went with unchoked. After doing the research, and coming up with Sheridan Blue Streaks are unchoked, and I want to shoot the old school cylindrical.20 cal pellets. And all the cool .20 modern ammo too. I like it so much I am considering a second 1377 or converting a Crosman 362 to .20.
Would going with a choked barrel and shooting those old cylinders be a bad idea? They are slug-like but don't I plan on using actual slug ammo. It seems to me, those pellets may not like getting squished with a choked barrel.
Loaded a photo, I use the factory 1399 stock with it. The original idea was all wood, cant find any place to get a wood shoulder stock.
Thoughts appreciated!
I hope you've got a lot of money to buy those Sheridan pellets.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top