Last edited:
Installed Tom’s brilliant system for external regulator adjustments. Very well engineered and simple (aren’t those THE best upgrades)! This system only adds one O-ring to the platform.

This was a fairly straight forward install. Do use Krytox lube on the aluminum to Ti tube threads (trust me), it will prevent a headache! The system performs very good. Of course, once system is installed and pressured up, if you need to decrease reg pressure, first degas at the 5K burst disk, make your adjustment with a bit more than you think is needed, pressure up and take the pressure up via the 3/16” adjuster as needed while under pressure. I adjusted reg up to 2,240 psi to sling 50.15s at the customer’s desired 900 fps. All looks great after some hammer spring adjustments to match reg.



This was a fairly straight forward install. Do use Krytox lube on the aluminum to Ti tube threads (trust me), it will prevent a headache! The system performs very good. Of course, once system is installed and pressured up, if you need to decrease reg pressure, first degas at the 5K burst disk, make your adjustment with a bit more than you think is needed, pressure up and take the pressure up via the 3/16” adjuster as needed while under pressure. I adjusted reg up to 2,240 psi to sling 50.15s at the customer’s desired 900 fps. All looks great after some hammer spring adjustments to match reg.


Created: 01/17/25 05:18 AM
Description: .30 AAA Paradigm
Notes 1: 0572
Notes 2:
Distance to Chrono(FT): 1.00
Ballistic Coefficient: 0.048
Bullet Weight(gr): 50.15
Temp: N/A °F
BP: N/A inHg
Altitude: 120.00
# FPS FT-LBS PF
15 898 89.81 45.03
14 896 89.41 44.93
13 894 89.01 44.83
12 895 89.21 44.88
11 900 90.21 45.13
10 897 89.61 44.98
9 898 89.81 45.03
8 899 90.01 45.08
7 896 89.41 44.93
6 897 89.61 44.98
5 897 89.61 44.98
4 897 89.61 44.98
3 897 89.61 44.98
2 898 89.81 45.03
1 898 89.81 45.03
Average: 897.1 FPS
SD: 1.5 FPS
Min: 894 FPS
Max: 900 FPS
Spread: 6 FPS
Shot/sec: 0.0
True MV: 899 FPS