Search results

  1. R

    Others Choppa!?

    The email said "FOOL auto..."
  2. R

    Others Seneca Aspen Fixed!

    Yessiree. I now have the experience to know to NOT EVER TOUCH AN ASPEN/FREEDOM AGAIN.....
  3. R

    Others Seneca Aspen Fixed!

    I more or less finally got the balancer tube sealed and pre-charged...that required a special probe. Assembled and aired it up. All went well....for a while. Apparently the pump check valves needed their O-rings replaced, as air would leak back into BOTH sides of the pump. After pressurizing the...
  4. R

    Others Seneca Aspen Fixed!

    Well, only partially fixed.......... There is this little tube under the barrel called a "balancer tube." Its function, I guess, is to provide some sort of assist when hand pumping against a pressurized main reservoir. i replaced all the O-rings except 1...the ball check valve O-ring. TRY to...
  5. R

    Others Seneca Aspen Fixed!

    I am waiting for a fill probe to precharge the "balance" chamber.......something I just learned about... I guess it makes pumping easier ?? Interesting stuff......
  6. R

    Others Ruger Air Hawk Elite II Barrels

    I see quite a few Ruger Air Hawk Elite II rifles for sale with upward bent barrels.......... I have straightened a few.......
  7. R

    Others Umarex Product Support (or Lack Thereof)

    I was dismayed when contacting Umarex in search of gas springs for their entry level rifles...Octane, Blackhawk, etc. I was told that they did not have parts for those rifles....... It really hit bottom when I called looking for a breech seal.........same reply. I was invited to send in the...
  8. R

    Gas Ram Hatsan 135 Vortex Reseal Project

    I resealed the Vortex gas spring in a ,25cal Mod. 135. Turned out nice! Charged the Vortex to 2100psi. Shooting 19.91gr domes pellets at 780fps. 27fpe. Not bad........ Good looking rifle. I still have a time getting the breech pins back in...
  9. R

    Gas Ram Hatsan Torpedo Reseal (short title...)

    I only charged the Vortex gas spring to 1800psi....needs 2100........ only shooting 700fps 19.91gr pellet...
  10. R

    Others Introduction

    I also find it unfathomable that Crosman would dispose of all 2100 parts WELL OVER A YEAR before alternate supplied parts are in stock. In fact, it will probably be over TWO years til the new parts arrive. I just don't understand the logic........2100 owners are left high and dry for want of...
  11. R

    Gas Ram Hatsan Torpedo Reseal (short title...)

    I purchased it non-working so I could "play" with it. It is mine, but I'm not married to it..........
  12. R

    Gas Ram Hatsan Torpedo Reseal (short title...)

    I received a dead .25cal Hatsan 150 Torpedo Vortex on Friday. The gas spring had lost its chutzpah....not unusual. I opened her up yesterday and performed the standard gas spring reseal. I have yet to have a Hatsan O-ring come out in 1 piece. They seem to be leftover from WWII and always crumble...
  13. R

    Others Seneca Aspen Fixed!

    I'll be just as happy finding it a new home and awaiting that info from a new owner.
  14. R

    Others Seneca Aspen Fixed!

    I picked up an "untested: Seneca Aspen off the bay. Of course, it leaked out the barrel. I ordered an exhaust valve poppet from PA, but it was different than the original and didn't cure the leak anyway. Next link in the chain was the exhaust valve sleeve. After chatting with AV, they sent me a...
  15. R

    PCP Seneca Aspen

    The Seneca needs frequent oiling. My pump arm couldn't hardly me moved til I put a few drops of silicone oil. Works like a charm.......
  16. R

    Others Introduction

    Mr. Phillip, Thnks for your reply. I would think....and this is based on logic and my professional manufacturing background, that,if the new parts are not 100% compatible with the old rifles, Crosman would KEEP those parts in support of their priior products... Makes sense, no?? Ron
  17. R

    Others Introduction

    Hi, Phillip, Why did Crosman THROW AWAY all parts unique to the 2100 without offering to sell to the Service Centers? And now we can't even get replacement parts as they have not yet been delivered by your "off shore" facility.....
  18. R

    Pump Crosman 2100/2200/766 Wood Stock

    Is there a section where members can offer items for sale?
  19. R

    Pump Crosman 2100/2200/766 Wood Stock

    I may.... I have quite a few butt stocks and can make the forearms. Matching the finish is the bugaboo....... If I do offer for sale, I will offer on an as-available basis...I will NOT take orders.
  20. R

    Pump Crosman 2100/2200/766 Wood Stock

    This is a set of wood furniture for current Crosman pumpers (except the Legacy 1000) The buttstock is a modified 622 stock and matches the current receiver perfectly. I believe it is elm, and has the original Crosman finish The forearm was made from scratch IIRC I used maple and finished to...
Back
Top